Do to the angle change of our windshield Clearview Shields has moved to a vertical height measurement, in addition to length enhancements
Note: Screen is measured vertically from vent exit on inner fairing to top edge of screen
Small- 11″ vertical (2.5″ Longer than stock 1.5″ wider than stock)
Medium- 12″ vertical ( 3.5″ Longer than stock 1.5″ wider then stock)
Large- 13.5″ vertical (5″ Longer than the stock screen 1.5″ wider then stock)
X-L- 14.5″ vertical ( 6.5″ Longer than the stock screen 1.5″ wider then stock)
The new Clearview Shields Low Rider ST windshield is 1.5″ wider than the stock screen to improve wind management. This measurement is from the widest point to point across the back of the screen.
The increased width will create a bigger pocket of air for the rider. Helping to reduce wind noise and buffeting at high speeds.
Clearview Shields offers three available tint options for the Low Rider ST. (Gallery pictures show 11″ Dark Grey)
(Medium gray is unavailable)
Light Grey- 75% Transmission
Smoke- 48% Transmission
Dark Grey- 15% Transmission
Clearview Shields Low Rider ST screen will come with the option of a no vent or vent.
The benefit of deleting the vent is keeping the rain and debris off of the rider. The vent delete also gives the screen a cleaner look.
The vented screen will help reduce head buffeting by allowing airflow in the low pressure zone behind the windshield. This will create a bigger pocket of air for the rider to sit in.
While there is pros and cons to the two screens both the vented and non-vented screens will offer optimal protection over the stock Harley screen.
Clearview Shields recurve design gives an additional 2″ of lift off the top edge. For example the 11″ recurve screen will offer the same protection as a 13″ tall screen. Clearview Shields designs the recurve to increase lift with minimal distortion to the screen.